CNC Shark Forum

So I am thinking of makeing a 6 and 5/8 board and then skipping a slot and then making another board like that so I have use of the track but I am not sure if that is a logical size or not what I am looking at doing is getting away using double sided tape but I dont feel confident enough to just use...

I will try that next time but what I did to correct the problem was to I think I went .015 and just draw it on the spoil board and then line it up that way. but I think what your saying might work better I will remember that. Thanks for your help.

So I did check the spoil board and I found a low spot in the board and set the z off that and resurfaced the spoil board. I did plane the surface of the project on the CNC and I thought after doing all that. i thought I would have it licked after that So I sanded down and maybe 150 was a bit much So...

Ok another problem I checked the wood and decided to do 5/16 deep and as it was cutting the letters it gets less and less depth until at the end it does not look like its cut. I checked the board and it looks pretty flat. there is no way that board is 5/16 off you would see it. SO then I have to ass...

So I am cutting into oak with a 90 degree v bit. I am going about .125 but I dont think its deep enough because when I sand I sand away the detail after painting trying to get it off even with masking it off so I am thinking that I am not going deep enough in the wood so I was wondering what everyon...

this is the other file

Sorry for the lateness of this I have been running my head off. So then I realised that its going to take forever with a .004 cutting path for the lettering. I have those in 60 30 and 90. The only other set I have is 161278: 1/16" Ball Nose Bit 161279: 1/8" Ball Nose Bit 818081: 1/4" Up cut Spiral B...

Yeah I am thinking something is wrong with the touchplate because last night I used a surface bit in the router i set it up as a end mill to only do a 1/16 shave on the surface of cherry and I set it all up and then turned it on and I set up the surface bit under endmill and I did a pocket and it do...

Thanks man I thought I registered it other wise I wouldnt be able to set the z with it all this time. I would think. I will look at that
Thanks man.

I think I am a bit over my head So I got three engraving bits from micro 100 a 90,60,30 and I am trying to use those so i can make ornaments and they are not coming out like I want I am trying to find a easy script \ Cut Angle Split Length (L2) Offset Point 00 Overall Length (L1) RTC-250-1 RTC-250-2...