CNC Shark Forum

Nice Job! Rod

I am enjoying my CNC Shark HD3 with extended bed even with its tremendous learning curve! First Project -- 1 Toolpath V-bit - Small 8"x10" engraving came out beautifully. No Problems!!! ***Note: did not use touchplate or the virtual setup on this toolpath run. Second Project --- Not so well (Operato...

Thank You! After I posted the question and pondered it with further thought I came to realized - that particular bit is not intended for CNC use and Vectric realized this when developing their software. Thank you again for your insight meb! All help is definitely appreciated! Continue to cutup that ...

Nice Job!

Is that Barnwood you are using or is that just some reclaimed wood from an old shed or something?

On the same note (adding a tool to the database) I am trying to add a 1/2" x 1/2" dovetail bit to the tool database under menu/header form tools. I draw a right side representation of the bit as told by error message which I had received the first time I entered tool into database and several other ...

Thank You for your quick response!

First time user - First time setup! (Retirement activity -- avoiding becoming a "couch potato"!) ;) CNC Shark HD3 Extended bed with Water-Cooled Spindle First Question: Is there anyone out there that is using the Water-Cooled Spindle with their CNC Shark? Where did you plug the water-cooled spindle ...

Is this (see attached) what you are looking for?

Looks as if you are having substantial static problems. This usually occurs through the dust collection system which can increase to a substantial amount if not corrected. It can also fry the controller card in the control panel if static is no resolved. Rockler.com sells a dust grounding kit item #...