3d vcarve has line that is not in preview

Discussion about the CNC Shark Pro Plus HD

Moderators: al wolford, sbk, Bob, Kayvon

Post Reply
petec
Posts: 1
Joined: Fri Feb 26, 2016 1:28 pm

3d vcarve has line that is not in preview

Post by petec »

I have setup and cut the Heart shape from Make and Design web site a few times on a couple of projects.
This last the job was about 80% done when a line that appears to be the z axis lifts up just enough to create a ridge line in the upper right area of the heart shape.

The ridge is not in the preview of VCarve Pro 8.5
has anyone had this happen on other jobs?

Pete

User avatar
Bob
Posts: 1252
Joined: Sun Aug 08, 2010 3:35 pm

Re: 3d vcarve has line that is not in preview

Post by Bob »

Pete,
A similar event happened to one of my first projects.
It drove me nuts until I noticed that I was leaning on the machine to watch the progress.
I stopped leaning on the machine, and the problem went away.
Your results may vary...
Bob
"Focus"
Antonie Van Leeuwenhoek (Developer of the microscope.)

Devlin
Posts: 12
Joined: Tue Dec 26, 2017 11:58 am

Re: 3d vcarve has line that is not in preview

Post by Devlin »

Hmmm. That was my solution. Stay off the machine....

Post Reply