shark

Anything and everything CNC-Shark-related

Moderators: ddw, al wolford, sbk, Bob, Kayvon

Post Reply
randonb
Posts: 2
Joined: Fri Oct 13, 2017 4:07 pm

shark

Post by randonb »

I am going to buy a Shark machine. I would like to know if you can use a memory stick with the machine instead of having to connect it to my computer. Thanks for the help

SteveM
Posts: 168
Joined: Thu Sep 08, 2016 1:29 pm
Location: Franklin, Wisconsin

Re: shark

Post by SteveM »

You can get the HD4 in 2 sizes, or the smaller version Piranah that also comes in 2 sizes.
Both machines use a USB stick to hold your cut file.
These machines have a hand held pendant that you will use and the USB stick gets inserted into the pendant.
Depending on what you plan on using it for will dictate the size of the machine.

randonb
Posts: 2
Joined: Fri Oct 13, 2017 4:07 pm

Re: shark

Post by randonb »

Thanks the specs and description of the machine just mentioned that you hook it up to a computer and didn't state that you could copy to a usb memory stick and use that instead of the whole computer
Thanks

SteveM
Posts: 168
Joined: Thu Sep 08, 2016 1:29 pm
Location: Franklin, Wisconsin

Re: shark

Post by SteveM »

The nice thing about the HD4 is you can use either the computer or copy your g code to a memory stick, plug it into the pendant and run your file.
Next wave does however suggest the preferred method is using the memory stick.

Post Reply