my router on the shark pro will not turn on when plugged into the control box....it will work plugged into the wall outlet. I have change the relay box but that did not work. if you have any suggest I would appreciate hearing them.
Thanks
Gwlynda
cncsharkpro router will not turn on
Moderators: al wolford, sbk, Bob, Kayvon
Re: cncsharkpro router will not turn on
Does the CNC controller power up? (lights?) Can you move the gantry, etc, by jogging?
Have you checked the power fuse? It should be in a little 'drawer' between the power cord for the controller and the plug in for the router. (assuming it is anything like mine).
That's all I got. I would suggest calling Next Wave support. I had to call them a couple of weeks ago, and they are fantastic.
Gordon
Have you checked the power fuse? It should be in a little 'drawer' between the power cord for the controller and the plug in for the router. (assuming it is anything like mine).
That's all I got. I would suggest calling Next Wave support. I had to call them a couple of weeks ago, and they are fantastic.
Gordon
Re: cncsharkpro router will not turn on
Having the same issue. If you find a solution let me know ill do the same