cncsharkpro router will not turn on

Questions/answers/discussion about initial setup of your CNC Shark

Moderators: sbk, al wolford

cncsharkpro router will not turn on

Postby Hound Depot » Mon Jul 25, 2016 6:29 pm

my router on the shark pro will not turn on when plugged into the control box....it will work plugged into the wall outlet. I have change the relay box but that did not work. if you have any suggest I would appreciate hearing them.

Thanks
Gwlynda
Hound Depot
 
Posts: 2
Joined: Sun May 01, 2016 4:01 pm

Re: cncsharkpro router will not turn on

Postby gordread » Thu Jul 28, 2016 9:14 am

Does the CNC controller power up? (lights?) Can you move the gantry, etc, by jogging?

Have you checked the power fuse? It should be in a little 'drawer' between the power cord for the controller and the plug in for the router. (assuming it is anything like mine).

That's all I got. I would suggest calling Next Wave support. I had to call them a couple of weeks ago, and they are fantastic.

Gordon
gordread
 
Posts: 167
Joined: Sun Jul 08, 2012 2:02 pm
Location: Onoway, Alberta

Re: cncsharkpro router will not turn on

Postby Davisric » Tue Jul 17, 2018 4:02 pm

Having the same issue. If you find a solution let me know ill do the same
Davisric
 
Posts: 2
Joined: Tue Jul 17, 2018 2:23 pm


Return to Setting up the Shark

Who is online

Users browsing this forum: Bing [Bot] and 1 guest