photo v carve laser post processor

Anything and everything CNC-Shark-related

Moderators: ddw, al wolford, sbk, Bob, Kayvon

Post Reply
stewali
Posts: 13
Joined: Sun Jan 18, 2015 6:50 pm

photo v carve laser post processor

Post by stewali »

Anyone have a laser postp for the cnc piranha that works in photo v carve. have tried all of the postp on next wave automation web site and all give an error.

Tim Owens
Posts: 361
Joined: Wed Jul 28, 2010 3:51 pm

Re: photo v carve laser post processor

Post by Tim Owens »

I would have you use the post processor for the shark should work fine on the PhotoVcarve.
However PhotoVcarve has nothing to do with laser. It controls the depth of the Z in relationship to the darkness of the color when carving with a router.
If you are trying to etch a photo then I would use the Piranha control panel that has that function built into it.
you can download it here
http://shop.nextwaveautomation.com/shop ... x?recid=29

This control panel will also connect to the sharks for those that would like to use a laser on there sharks.

Post Reply