V Carve 6.5

Discussion/questions about software used with your CNC Shark and programming issues

Moderators: al wolford, sbk, Bob, Kayvon

Post Reply
stephenb79
Posts: 22
Joined: Wed Aug 04, 2010 4:23 pm

V Carve 6.5

Post by stephenb79 »

Up until recent updates I could "Fit vectors to bitmap" with no issue. Now It acts like it works but no vectors are created regardless of settings, color or black and white. Anyone else struggling?

tonydude
Posts: 1586
Joined: Tue Aug 17, 2010 9:23 am
Location: Buffalo,NY

Re: V Carve 6.5

Post by tonydude »

Can you post what you are trying to do? Otherwise we are just guessing, we need a file or picture.

Tony
Buffalo,NY

"What will matter is not what you bought but what you built; not what you got, but what you gave”

Aspire 12.010, photo vcarve, cut3D.cnc mako shark extended bed with the new upgraded HD 5 gantry with Led pendent.

stephenb79
Posts: 22
Joined: Wed Aug 04, 2010 4:23 pm

Re: V Carve 6.5

Post by stephenb79 »

I was importing an image and trying to fit vectors to it. It turns out my file extension was a .png file type and the VCarve program would not trace it. My solution was to open the images in microsoft paint and save them as a different file type .bmp. I then brought the new file back in and the program worked perfectly. It's probably listed somewhere about compatible file types. It had no issue importing the png files but that was all I could do. User error that's for sure.

Post Reply