CNC Shark Forum

I checked it Bob and it's set at .5, so no problem there. GRRRR.

For some reason when I run virtual setup the z axis goes straight up way past what I set as the z axis point. It goes up until it hits the top level and keeps trying to go higher until i do an emergency stop. I have looked and looked at the toolpath, tried different toolpaths and even shut everythin...

Getting ready to take a stab at my first attempt at tiling. Wish me luck.

I am in the process of making US Flags with the pledge of Allegiance on the front and am having an issue making the stars. I use an RCK-360 v-bit for the stars and have used a quarter inch mill bit and a ball nose bit to clear out the flat areas between the stars. But both the end mill and the ball ...

Not looking for something to cut through the wood, just engraving. I'll mull over it some more. Thanks.

I'm thinking about buying that Laser Attachment with adapter for my Shark Pro Plus HD. Is it worth the $850?

I'll give it a try, thanks.

Mines from Bench Top Precision.

I'm still learning how to use my diamond drag bit. It's called a drag because you don't turn on the router. it just drags across the metal engraving. I haven't quite figured out the pressure yet because it still leaves shadow of the engraving on the metal. Live and learn.

OK, almost have it figured out. I originally told the CNC to raise the bit a quarter of an inch when moving from one engraving to another. Problem is, once the spring pushes the bit out, it's about three quarters of an inch. Hence, it's still making contact with the metal surface. Now, I have to fig...