Search found 4 matches
- Sat Aug 06, 2022 2:34 pm
- Forum: CNC Shark Pro Plus HD
- Topic: Gantry mounted dust boot HD520
- Replies: 4
- Views: 3123
Re: Gantry mounted dust boot HD520
I have attached my second iteration. This is cut out of .090" ABS sheet 10"x25" you will heat and bend the ABS sheet at the indicated spots in the crv file. You will need to drill and tap a few holes in the gantry OR just predrill for some screws. These will go in the short slots, this is for removi...
- Fri Aug 05, 2022 7:16 pm
- Forum: CNC Shark Pro Plus HD
- Topic: Gantry mounted dust boot HD520
- Replies: 4
- Views: 3123
Gantry mounted dust boot HD520
Has anyone designed a gantry-mounted dust boot that stays at the same level regardless of z height? I have a hell of a time with z shift/tilt when using a dust shoe that is mounted to the moving spindle. And before I get too far into my design and prototyping I was curious if anyone else has seen or...
- Tue Apr 06, 2021 1:47 pm
- Forum: Setting up the Shark
- Topic: Setting/Saving permanent home x,y?
- Replies: 8
- Views: 8109
Re: Setting/Saving permanent home x,y?
I have found that even there is no permanent “home” there is an x,y zero app that will home to the lower left corner from within 3-4”. You can then set an offset to get to your corner.
Edit: this is on the HD520 extended
Edit: this is on the HD520 extended
- Tue Mar 23, 2021 7:48 am
- Forum: Setting up the Shark
- Topic: Setting/Saving permanent home x,y?
- Replies: 8
- Views: 8109
Setting/Saving permanent home x,y?
Is it possible to set or save a permanent home x,y position?
I like to work from corners and would like to be able to place jigs/fences then register my parts against the fence instead of random space. is there a way to have the shark save a home point to recall later?
I like to work from corners and would like to be able to place jigs/fences then register my parts against the fence instead of random space. is there a way to have the shark save a home point to recall later?