I got some at Lowe’s
Jim
Search found 104 matches
- Thu Oct 07, 2021 7:08 am
- Forum: CNC Shark
- Topic: water tubing
- Replies: 3
- Views: 2434
- Sat Aug 28, 2021 10:32 am
- Forum: CNC Shark
- Topic: Huanyang inverter help
- Replies: 8
- Views: 3333
Re: Huanyang inverter help
After much digging I found my answer PD000- Parameter lock-- 0 is unlocked, 1 is locked. So after you're done, you can come back to this and set it to "1" so that you don't inadvertently change anything. When you don’t know, you don’t know Thanks for everyone’s time and effort. The information I fou...
- Thu Aug 26, 2021 2:27 pm
- Forum: CNC Shark
- Topic: Huanyang inverter help
- Replies: 8
- Views: 3333
Re: Huanyang inverter help
I get to PD 052
Press set and it is on 3 (factory)
I change it to 1 and press set
I think it is supposed to display “end”
But instead it goes to PD 053 and when I check PD052 it is still 3
Could I be missing a step?
Jim
Press set and it is on 3 (factory)
I change it to 1 and press set
I think it is supposed to display “end”
But instead it goes to PD 053 and when I check PD052 it is still 3
Could I be missing a step?
Jim
- Sat Aug 21, 2021 11:39 am
- Forum: CNC Shark
- Topic: Huanyang inverter help
- Replies: 8
- Views: 3333
Re: Huanyang inverter help
Rando
Thanks for your time and information. I will try it when I get back to my machine. I am away for a while
Jim
Thanks for your time and information. I will try it when I get back to my machine. I am away for a while
Jim
- Thu Aug 19, 2021 4:23 pm
- Forum: CNC Shark
- Topic: Huanyang inverter help
- Replies: 8
- Views: 3333
Re: Huanyang inverter help
Thanks for the replies. It’s a 110 volt. Here is a pic
Jim
Jim
- Wed Aug 18, 2021 11:46 am
- Forum: CNC Shark
- Topic: Huanyang inverter help
- Replies: 8
- Views: 3333
Huanyang inverter help
I have the huanyang inverter and water cooled spindle on my CNC shark. It is almost silent compared to the routers I had been using. I am trying to find a way to have a light come on at the spindle when the spindle is running as a warning that it is in fact on. It has 24 control terminals and I’m ho...
- Fri Dec 13, 2019 2:41 pm
- Forum: Software. Programming
- Topic: Virtual Zero Unlimited
- Replies: 10
- Views: 9324
Re: Virtual Zero Unlimited
Any update on time frame for Virtual Zero Unlimited / Ready 2 Control?
Dec 1 has come and gone. I am interested in the new panel.
3.0 Is lacking a lot of stuff. I guess They want all the bugs out before release. Can’t blame them!
Jim
Dec 1 has come and gone. I am interested in the new panel.
3.0 Is lacking a lot of stuff. I guess They want all the bugs out before release. Can’t blame them!
Jim
Re: Pendant
I just got a reply from NWA and got it working . Check the setup menu on the pendant and check the model number. It should be 4004 for the HD4. I bet it's got the default 100 for the piranha FX, it has a different z screw. Touch the number to get the number keys to display. I hope this helps someone...
Pendant
I have upgraded to the pendant control and 3.0 Control panel. If I jog 1” with the X and Y it travels 1” But when I jog 1” with the Z it travels 2”. Humm Has anyone had this issue or know of a fix? Also, how do I get to the “location area” Screen and how do you jog by set increments? 40BC6956-9FFE-4...
- Wed Jul 24, 2019 9:52 am
- Forum: CNC Shark
- Topic: Router mount clamp
- Replies: 8
- Views: 4138
Re: Router mount clamp
You could make your own. I made mine out of scrap Corian. You could probably use plywood or MFB.
Make it as thick as you need to, mine might be a little overkill
Jim
Make it as thick as you need to, mine might be a little overkill
Jim