CNC Shark Forum

Anyone have any thoughts on the hammerhead router?

After downloading and installing the shark control panel on a windows 8 computer where do I find the cnc shark control panel icon?

I am looking for some materials.

First I remember reading about someone using a plastic that had a dark outside and a white inside.

Second I am looking for a good outdoor clear coat for wood. One that will hold up in the sun and rain.

Any recommendations would be greatly appreciated.

Thanks John

dennish and Karen

Are you using Photo Carve to program you photo's?

Thank you both. This was a big help.

Thanks for the advice and examples. The problem I have is looking at a certain font and find the name of it. What were the names of the examples you gave?

Is there a good web site that demonstrates the correct font to the project? Say boat sign or camping sign.

John

Good news. I checked the XYZ connection and there was one wire that had came out of the Y connector. Reconnected the one wire and It was good to go. Lets start carving. Knothead I shipped my control box and usb cable to NWA and it came back with a clean bill of heath. I uninstalled all shark program...

Will I have good news and bad news. The good new is I was able to load a sample file. Bad news is the Y axis is in a bind. The motor try to move the screw but it can not. How is the best way to to disassemble the machine to get screw? By the way thanks to all the help with my previous problem. Thank...

Here is the latest update. I used Billk's sequence. 1. Computer on. 2. Plug in USB 3. Turn on control box 4. Start Shark control panel. Ran frimware updater.Two times frimware.png Replaced the 1G Sandisk SD Card with a 4G Sandisk. I know this disk works because you can load and unload picture file j...