Search found 755 matches
- Sun May 01, 2022 11:56 am
- Forum: Software. Programming
- Topic: Tape Splitting
- Replies: 7
- Views: 4573
Re: Tape Splitting
(Sorry for the delays....the system refused to let me post the text. Something wrong in one of the lines of typing...still have no clue what it was that upset it so) I have to assume you mean the VECTRIC post-processors for the Shark, correct? The capability you're after would actually have to be pa...
- Sun May 01, 2022 11:53 am
- Forum: CNC Shark
- Topic: Non-Standard Router Adapters
- Replies: 1
- Views: 825
Re: Non-Standard Router Adapters
Cut one yourself.
The router plate outside dimensions and bolt placement are easy to determine, and you already know the shape of the router you want to use. just make sure the battery doesn't hit on anything as it goes up and down.
Get yourself some 3/4" thick HDPE and have at it
Rando
The router plate outside dimensions and bolt placement are easy to determine, and you already know the shape of the router you want to use. just make sure the battery doesn't hit on anything as it goes up and down.
Get yourself some 3/4" thick HDPE and have at it
Rando
- Thu Mar 31, 2022 4:35 pm
- Forum: Shark Pro
- Topic: X axis doesn’t move
- Replies: 3
- Views: 6141
Re: X axis doesn’t move
JoLaFrank: A couple items in your post...the easy one first! Posting a new thread, once you're (registered and) logged in is like shown in this image: The top purple arrow shows the current forum section, so you want to be in the most appropriate place. The bottom purple arrow shows where they have ...
- Wed Mar 30, 2022 8:54 am
- Forum: Setting up the Shark
- Topic: Altering X and Y orientation
- Replies: 25
- Views: 43105
Re: Altering X and Y orientation
LOL...warranty. :roll: You COULD always go to Amazon, and buy one male and one female DB-9 connectors and make an adapter with some 18Ga wire... :ugeek: Just sayin'... https://www.amazon.com/dp/B08P7738KY As for what's "easiest" for NWA...you're not in Marketing, are you? Buyer lock-in is exactly wh...
- Tue Mar 29, 2022 11:02 am
- Forum: Setting up the Shark
- Topic: Altering X and Y orientation
- Replies: 25
- Views: 43105
Re: Altering X and Y orientation
Tell NWA to learn a little about their own systems! All you have to do is reverse the polarity of ONE of the stepper motor coils and it runs in reverse. Now, if you have homing sensors, they will be at the wrong end of the axis. Here's an article that talks more about it: https://www.electrodragon.c...
- Thu Feb 24, 2022 12:11 am
- Forum: CNC Shark Pro Plus HD
- Topic: hd3 upgrade - hd5 aluminum spindle clamp
- Replies: 19
- Views: 15282
Re: hd3 upgrade - hd5 aluminum spindle clamp
Wait....is this Mr. Yost?
- Thu Feb 24, 2022 12:09 am
- Forum: Everything 4th Axis
- Topic: Convert a STL File to Machine Using my 4th Axis
- Replies: 4
- Views: 4090
- Sat Jan 08, 2022 4:07 pm
- Forum: Setting up the Shark
- Topic: Registration page down. Any options?
- Replies: 2
- Views: 2385
Re: Registration page down. Any options?
Yes...wait until Monday
- Sat Dec 11, 2021 11:36 am
- Forum: CNC Shark
- Topic: New Spindle and HD520 - Spindle and/or XY Axis stops
- Replies: 7
- Views: 4853
Re: New Spindle and HD520 - Spindle and/or XY Axis stops
It's gonna be on the screw terminal block with all the others.
If you have a big-screw set (power and to the spindle motor) and a small-screw set (control signals),
then it will be on the big-screw terminal block somewhere.
If you have a big-screw set (power and to the spindle motor) and a small-screw set (control signals),
then it will be on the big-screw terminal block somewhere.
- Tue Dec 07, 2021 7:04 pm
- Forum: CNC Shark
- Topic: New Spindle and HD520 - Spindle and/or XY Axis stops
- Replies: 7
- Views: 4853
Re: New Spindle and HD520 - Spindle and/or XY Axis stops
Andycollen: The VFD very likely has a plastic chassis, and therefore simply mounting it does not actually ground the case. I experienced odd failures too, until I bonded the case of the VFD to the case of the controller. That was actually the "E" for "earth" screw connection on mine, and might be a ...