Two problems.
First, the computer would loose connection with the control box. Moved to another USB connection on the computer and wrapped tape on the box end to tighten the fit, was really loose fitting.
Second, my control software will not open up. It connects to the box, but the software will not open. If I click it again, says another instance is running.
Cant shut it down in task manager.
I have tried all versions of the controll software F,I,H and they do the same. Also tried on my desktop, same results. Opens only a few times.
I keep the computer updated and cleaned and defragged.
Why will the software not open up for me to use?
I had to take orders and will ship the signs from home, felt Like I had a $4000 paperweight at the show. Last show we did, it was all good, sold 24 signs.
I will try Nextwave support next and see how it its !!
Thanks, Glenn
Control Software Not opening on Computer
Moderators: al wolford, sbk, Bob, Kayvon
Re: Control Software Not opening on Computer
Do you have separate log ins on the PC connected to the controller? I noticed that on the Shark we use in the Furniture shop where I teach that when a student logs out and another logs in it takes powering off and back on the controller to get the control software to find it and open up.
Re: Control Software Not opening on Computer
No, It does connect to the box and you finds the serial numer and the machine clicks when it does, but the software does not open up for me to use.
Thanks for the reply.
Emailed support last night. I also replaced the USB cable with same results.
Glenn
Thanks for the reply.
Emailed support last night. I also replaced the USB cable with same results.
Glenn
Re: Control Software Not opening on Computer
If you get "Instance already open" errors, then the software may be loading but off the edge of the screen. Ever have a second monitor attached? I have a second monitor (big TV) that I occasionally use on my home office PC, and if I leave a program there the next time I open it without the TV on the program is impossible to see.
Just shooting at flies here. I know these problems can be difficult and frustrating to resolve. Good luck with tech support.
Just shooting at flies here. I know these problems can be difficult and frustrating to resolve. Good luck with tech support.
Re: Control Software Not opening on Computer
Only have one screen.
Now it works on my desktop !! But not the laptop. Was not working on both today and yesterday.
Even did a system restore to last week when it was working and does same thing.
Tech support has not seen this before, great !
Running it as admin. also.
Now it works on my desktop !! But not the laptop. Was not working on both today and yesterday.
Even did a system restore to last week when it was working and does same thing.
Tech support has not seen this before, great !
Running it as admin. also.
Re: Control Software Not opening on Computer
I just got it to work !!
I shut off the wireless network and disabled my antivirus and its working so far !!
Wonder why it worked with that stuff on last time.
Will try to run parts later and see if it still works.
Glenn !!
I shut off the wireless network and disabled my antivirus and its working so far !!
Wonder why it worked with that stuff on last time.
Will try to run parts later and see if it still works.
Glenn !!
-
- Posts: 74
- Joined: Sat Apr 20, 2013 12:04 pm
Re: Control Software Not opening on Computer
Did you install with Administrator rights?
Just right click an .exe and install that way.
Any number of software "errors" can stem from failure to do so.
Just right click an .exe and install that way.
Any number of software "errors" can stem from failure to do so.