I have a Shark HD 510 and I'm using VCarve software. I'd like to make some changes to the Post Processors (I'm OK doing this - I actually wrote the motion control programs to cut Bausch & Lomb contact lenses on CNC lathes). My question is: Can anybody point me to documentation that I can read to understand:
1. What all the available commands are?
2. What they cause the machine to do in the generated GCode?
Thanks in advance!
Question on VCarve Post Processors for Shark HD510
Moderators: al wolford, sbk, Bob, Kayvon
-
- Posts: 411
- Joined: Tue Mar 08, 2016 5:23 pm
Re: Question on VCarve Post Processors for Shark HD510
Look at the "Post Processor Editing Guide"
V-Carve Pro V12
Menu --- Help > Post Processor Editing Guide
You could use the NCViewer at https://ncviewer.com/ for test of your edited/modified code before attempting cnc machine test.
Sharkcutup
V-Carve Pro V12
Menu --- Help > Post Processor Editing Guide
You could use the NCViewer at https://ncviewer.com/ for test of your edited/modified code before attempting cnc machine test.
Sharkcutup
V-Carve Pro Tips, Gadget Tips & Videos
YouTube Channel - Sharkcutup CNC
V-Carve Pro 12.009
YouTube Channel - Sharkcutup CNC
V-Carve Pro 12.009