Gcode Issue...I think
Posted: Sun Dec 27, 2020 9:55 pm
I am experiencing random rounding over of corners.
I am using Aspire 10.512 with the latest postprocessor (this is a metric project so I am using the metric PP...but I tried it with inches and it did the same thing) I am trying to create a dovetail project. For a machine I have an a CnC Shark Pro Plus HD 25x25x7 and using Control Panel 2. In Aspire I have sharp external corners selected and am trying to cut a simple external profile path. There are no open vectors and no duplicate vectors.
Here is an image showing a close up of the tool path.
https://www.dropbox.com/s/fc4pem0k2jab2 ... 2.JPG?dl=0
Link showing preview in Aspire:
https://www.dropbox.com/s/cxilnksclnumm ... e.JPG?dl=0
Link showing preview in Control Panel:
https://www.dropbox.com/s/e35ax3fb0kwoo ... l.JPG?dl=0
All the above show nice sharp corners.
When I go to cut It looks like this:
https://www.dropbox.com/s/suwafzeipl2il ... .JPEG?dl=0
Lastly here is a copy of the gcode file:
https://www.dropbox.com/s/xwqc6mhsnwbaa ... t.tap?dl=0
Your help is appreciated!
Andy
I am using Aspire 10.512 with the latest postprocessor (this is a metric project so I am using the metric PP...but I tried it with inches and it did the same thing) I am trying to create a dovetail project. For a machine I have an a CnC Shark Pro Plus HD 25x25x7 and using Control Panel 2. In Aspire I have sharp external corners selected and am trying to cut a simple external profile path. There are no open vectors and no duplicate vectors.
Here is an image showing a close up of the tool path.
https://www.dropbox.com/s/fc4pem0k2jab2 ... 2.JPG?dl=0
Link showing preview in Aspire:
https://www.dropbox.com/s/cxilnksclnumm ... e.JPG?dl=0
Link showing preview in Control Panel:
https://www.dropbox.com/s/e35ax3fb0kwoo ... l.JPG?dl=0
All the above show nice sharp corners.
When I go to cut It looks like this:
https://www.dropbox.com/s/suwafzeipl2il ... .JPEG?dl=0
Lastly here is a copy of the gcode file:
https://www.dropbox.com/s/xwqc6mhsnwbaa ... t.tap?dl=0
Your help is appreciated!
Andy