HD 520 controller update
Moderators: al wolford, sbk, Bob, Kayvon
-
- Posts: 3
- Joined: Sat Mar 20, 2021 6:29 am
HD 520 controller update
I just recently bought my HD520 with the extended bed. When I connect my PC with the ready2control software it keeps asking if I want to update the HD 510 controller software. Does the HD520 actually use the same controller as the HD 510? should I apply this update?
Re: HD 520 controller update
en precio: yes, and yes.
If your z-axis won't go to the bottom, then it's usually the product ID got reset, and needs to be put to
4003 (for the 510), or 4004 (for the longer 520). Or at least that's the rumors. I'm pretty sure sacrificing
a chicken was removed in the 4.5 generation
Regards,
Rando
If your z-axis won't go to the bottom, then it's usually the product ID got reset, and needs to be put to
4003 (for the 510), or 4004 (for the longer 520). Or at least that's the rumors. I'm pretty sure sacrificing
a chicken was removed in the 4.5 generation
Regards,
Rando
=====================================================
ThomR.com Creative tools and photographic art
A proud member of the Pacific Northwest CNC Club (now on Facebook)
ThomR.com Creative tools and photographic art
A proud member of the Pacific Northwest CNC Club (now on Facebook)
Re: HD 520 controller update
The controller needs to be updated so that the firmware identifies the software easily and you can make changes in the source code as well. For details you can visit http://servodrivesrepair.com/.