Vcarve Pro not giving Ready2Control bad data
Moderators: al wolford, sbk, Bob, Kayvon
Vcarve Pro not giving Ready2Control bad data
I am a newbie so this is most likely an operator error... I am using Vcarve Pro to create my projects but when I am carving text (saving tap file and loading it into the machine using Ready2Carve) the finished product comes out almost 1/2 the size of my job in Vcarve .. What am I doing wrong??
Re: Vcarve Pro not giving Ready2Control bad data
Are you using the right post processor? CNCShark-USB Arcs (inch) (*.tap) and the other one is Next Wave CNC (inch) (*.tap) also are your job size in inches not mm
Tony
Tony
Buffalo,NY
"What will matter is not what you bought but what you built; not what you got, but what you gave”
Aspire 11.015, photo vcarve, cnc mako shark extended bed with the new upgraded HD 5 gantry with Led pendent.
"What will matter is not what you bought but what you built; not what you got, but what you gave”
Aspire 11.015, photo vcarve, cnc mako shark extended bed with the new upgraded HD 5 gantry with Led pendent.
Re: Vcarve Pro not giving Ready2Control bad data
My bad, the new controller and pendant were set to the wrong model type.