HD510 and Aspire

Discussion/questions about software used with your CNC Shark and programming issues

Moderators: al wolford, sbk, Bob, Kayvon

Post Reply
WBill
Posts: 4
Joined: Sat Jul 16, 2022 10:34 am

HD510 and Aspire

Post by WBill »

I'm looking to purchase the HD510 but does it work with the vectric aspire software for 3d carving?

Rando
Posts: 757
Joined: Tue Jan 06, 2015 3:24 pm
Location: Boise, ID
Contact:

Re: HD510 and Aspire

Post by Rando »

Yes, just be sure to use the right post-processor, available on the Vectric or NWA site. Here's the low-down from NWA:

https://nextwaveautomation.zendesk.com/ ... rve-Aspire

Hope that helps,

Rando
=====================================================
ThomR.com Creative tools and photographic art
A proud member of the Pacific Northwest CNC Club (now on Facebook)

WBill
Posts: 4
Joined: Sat Jul 16, 2022 10:34 am

Re: HD510 and Aspire

Post by WBill »

Thank you Rando. That greatly helped.

Post Reply