White screen on pendant HD510
Moderators: al wolford, sbk, Bob, Kayvon
White screen on pendant HD510
I have disassembled pendant and found very little dust. Also have updated firmware on pendant and controller. Tried restarting with finger on screen. Unfortunately still unresponsive . Would appreciate any suggestions
Re: White screen on pendant HD510
Willwood,
Run card stock around the corners if it doesn't work call nextwave at 419-318-4822 M-F 9-5 est
Tony
Run card stock around the corners if it doesn't work call nextwave at 419-318-4822 M-F 9-5 est
Tony
Buffalo,NY
"What will matter is not what you bought but what you built; not what you got, but what you gave”
Aspire 11.015, photo vcarve, cnc mako shark extended bed with the new upgraded HD 5 gantry with Led pendent.
"What will matter is not what you bought but what you built; not what you got, but what you gave”
Aspire 11.015, photo vcarve, cnc mako shark extended bed with the new upgraded HD 5 gantry with Led pendent.
Re: White screen on pendant HD510
Thanks Tony,
I tried the card around corners before I disassembled .
I tried the card around corners before I disassembled .
Last edited by willwood on Thu Nov 16, 2023 9:27 am, edited 1 time in total.
Re: White screen on pendant HD510
Next Wave is replacing my pendant, thanks