Firmware update to add this button.
Posted: Sat Nov 25, 2023 7:11 am
Please consider this option.
When running a toolpath on the pendant. Add one more button "Move to tooling area" and have the ability to add that coordinate to the setup.
For example I am using a jig board setup. I am working on 12 pieces of plywood that one at a time sit inside this jig and is held down for a toolpath(s) operation.
One this operation completes. It would be nice to hit this button to move the xy out of the way (I know Vectric has this in the toolpath setup but it would more coinvent if it was right here.) This would keep me from hitting a series of buttons to get out of the toolpath so I can jog the machine out of the way so I can take out the freshly cut work and put in a new piece to be cut.
I am making 12 puzzle dice boxes. Each one has about 30 parts that are being milled on the CNC. This would save me a bunch of pendant moves.
Thanks for a great product and looking forward to getting out into the shop today and working on those 300 plus parts... CNC makes it fun!
When running a toolpath on the pendant. Add one more button "Move to tooling area" and have the ability to add that coordinate to the setup.
For example I am using a jig board setup. I am working on 12 pieces of plywood that one at a time sit inside this jig and is held down for a toolpath(s) operation.
One this operation completes. It would be nice to hit this button to move the xy out of the way (I know Vectric has this in the toolpath setup but it would more coinvent if it was right here.) This would keep me from hitting a series of buttons to get out of the toolpath so I can jog the machine out of the way so I can take out the freshly cut work and put in a new piece to be cut.
I am making 12 puzzle dice boxes. Each one has about 30 parts that are being milled on the CNC. This would save me a bunch of pendant moves.
Thanks for a great product and looking forward to getting out into the shop today and working on those 300 plus parts... CNC makes it fun!