chinese checkers
Moderators: al wolford, sbk, Bob, Kayvon
Forum rules
Do not post any files that violate copyright or licensing guidelines. Any post violating this rule will be deleted and the member may be banned from future use of cncsharktalk.
Do not post any files that violate copyright or licensing guidelines. Any post violating this rule will be deleted and the member may be banned from future use of cncsharktalk.
chinese checkers
I made my grandson and grand doughter the aggravation game board out of walnut, they liked it very much. Just like grand kids they said it would be great to have a chinese checker board too. I know I might be asking alot but does someone have a chinese checker board toolpath? Thanks inadvance
-
- Posts: 23
- Joined: Thu Dec 29, 2011 9:19 am
Re: chinese checkers
I hop this will help you.
- Attachments
-
- GameBoard 1.crv
- I don't think this violates any copyright laws. I created this with V-Carve and it took me some time. It wasn't as easy as it looked!
- (219.5 KiB) Downloaded 962 times
-
- Posts: 23
- Joined: Thu Dec 29, 2011 9:19 am
Re: chinese checkers
I finely got around to putting a tool path to this project and then ordered the marbles! Opps! Marbles are about .625 not .375 so it was a very tight fit for the marbles at 11 inch. I just stretched it out almost 2" and this seems to fit fairly well.
- Attachments
-
- GameBoard x14 y14.crv
- (63.5 KiB) Downloaded 789 times
- Consultingwoodworker
- Posts: 333
- Joined: Fri Jul 02, 2010 7:37 am
- Location: Nashville area
- Contact:
Re: chinese checkers
If you check the post right below this one, I created a Chinese Checker Board for WoodWorker's Journal.
You can watch the video and there are links to .dxf, .tap and .crv files.
Ralph
You can watch the video and there are links to .dxf, .tap and .crv files.
Ralph