another clock

Share your Shark projects with other forum members!

Moderators: al wolford, sbk, Bob, Kayvon, al wolford, sbk, Bob, Kayvon

Forum rules
Do not post any files that violate copyright or licensing guidelines. Any post violating this rule will be deleted and the member may be banned from future use of cncsharktalk.
Post Reply
sharkcutup
Posts: 389
Joined: Tue Mar 08, 2016 5:23 pm

another clock

Post by sharkcutup »

20170519_110941.jpg
This just getting too dang easy! Design it, prepare it, carve it!!!

Have a GREAT DAY everyone!!! :D

Be SAFE around those AWESOME machines!!! ;)

Sharkcutup
Last edited by sharkcutup on Fri May 19, 2017 11:22 am, edited 1 time in total.
Shark HD3 Pro Plus Extended Bed with Water-Cooled Spindle
Facebook: hoganscnccrafts
www.hoganscnccrafts.com

User avatar
bill z
Posts: 337
Joined: Fri Sep 25, 2015 9:09 am
Location: Spring, Texas USA

Re: another clock

Post by bill z »

Sharkcutup,

Do you live in Australia or New Zealand? Your pictures appear to be upside down. I figure they would work down there. :D

This is certainly an interesting pattern.

sharkcutup
Posts: 389
Joined: Tue Mar 08, 2016 5:23 pm

Re: another clock

Post by sharkcutup »

Sharkcutup,

Do you live in Australia or New Zealand? Your pictures appear to be upside down. I figure they would work down there. :D

This is certainly an interesting pattern.
Neither I live in the Southeast of the USA. I posted this thread from my cell phone, not exactly sure why the photo is upside down here. It is in the correct orientation on my cell. :?: :roll:

Yeah the pattern was drawn from what I had seen while I was out and about one day. Thought I'd give it a go and see how it would look --- turned out very nice so far. I plan on putting a thin slab
of red oak in between the two base slabs and putting a darker stain on the middle (clock) section with the rest I will probably just put a natural finish coat on them.

Have a GREAT DAY!!! :D

Be SAFE around those AWESOME machines!!! ;)

Sharkcutup
Shark HD3 Pro Plus Extended Bed with Water-Cooled Spindle
Facebook: hoganscnccrafts
www.hoganscnccrafts.com

User avatar
Kayvon
Posts: 513
Joined: Tue Oct 21, 2014 11:46 pm

Re: another clock

Post by Kayvon »

sharkcutup wrote:This just getting too dang easy! Design it, prepare it, carve it!!!
Join us in the wooden clock thread... you'll find some increased challenge. :)

sharkcutup
Posts: 389
Joined: Tue Mar 08, 2016 5:23 pm

Re: another clock

Post by sharkcutup »

Join us in the wooden clock thread... you'll find some increased challenge. :) Kayvon
Challenge --- I Agree!!!

But I am not so sure I want to play around with " Time "! Seems to me that " Time " has been moving along just fine without any of my help and/or interference!!! :roll:

Kayvon, Thank you for the suggestion though! ;) I have been monitoring that particular Thread "CNC and Clock Building" from time to time. It is fascinating and AWE inspiring to see wood returned to life once again!

Good Luck with your Wood Clock Building!!! :D

Have a GREAT DAY!!! :D

Be SAFE around those AWESOME machines!!! ;)

Sharkcutup
Shark HD3 Pro Plus Extended Bed with Water-Cooled Spindle
Facebook: hoganscnccrafts
www.hoganscnccrafts.com

SteveM
Posts: 168
Joined: Thu Sep 08, 2016 1:29 pm
Location: Franklin, Wisconsin

Re: another clock

Post by SteveM »

Does the part with the clock in it just sit on the two vertical pieces?
Very neat design!

sharkcutup
Posts: 389
Joined: Tue Mar 08, 2016 5:23 pm

Re: another clock

Post by sharkcutup »

Does the part with the clock in it just sit on the two vertical pieces?
Yes it does. This way you can take it down to change the battery whenever needed without requiring to have to move the whole thing.

It is nearing completion so I will be posting a photo of the completed clock here soon!!!

Sharkcutup
Shark HD3 Pro Plus Extended Bed with Water-Cooled Spindle
Facebook: hoganscnccrafts
www.hoganscnccrafts.com

Post Reply