Looking for a half inch end mill bit with 3 inch depth of cut. Does anyone have a source?
Thanks.
Edit:: with a half inch shank
Where can I find this bit?
Moderators: al wolford, sbk, Bob, Kayvon
-
- Posts: 54
- Joined: Wed Nov 07, 2012 2:02 pm
- Location: Somerset Ky
Re: Where can I find this bit?
Ron,
They are out there but you'll have to browse around to find exactly what you're looking for based on your application. Here's a link to one of our CNC Club's useful web links that lists all the bit distributors our members have dealt with:
http://pnwcnc.org/index.php/useful-web-links/80-bits
I found a 1/2" bit for cutting aluminum down in the Application Specialties suppliers that had a 3.165" cutting length and 6" overall length. Here's the link:
https://heritagecutter.com/DataFlute/Pu ... I,117.aspx
They are out there but you'll have to browse around to find exactly what you're looking for based on your application. Here's a link to one of our CNC Club's useful web links that lists all the bit distributors our members have dealt with:
http://pnwcnc.org/index.php/useful-web-links/80-bits
I found a 1/2" bit for cutting aluminum down in the Application Specialties suppliers that had a 3.165" cutting length and 6" overall length. Here's the link:
https://heritagecutter.com/DataFlute/Pu ... I,117.aspx
Paul Fison
Tacoma, Washington, USA
(253) 925-0855
Tacoma, Washington, USA
(253) 925-0855
Re: Where can I find this bit?
the Cutting tool source also has 0.50 d. with 3" lOC ( flute length)
www.cuttingtoolsource.com
I buy a lot of bits from them
Danwood
www.cuttingtoolsource.com
I buy a lot of bits from them
Danwood
-
- Posts: 54
- Joined: Wed Nov 07, 2012 2:02 pm
- Location: Somerset Ky