hd3 upgrade - hd5 aluminum spindle clamp
Moderators: al wolford, sbk, Bob, Kayvon
hd3 upgrade - hd5 aluminum spindle clamp
ALUMINUM SPINDLE CLAMP UPGRADE KIT FOR OLDER SHARKS
https://www.nextwavecnc.com/shop/ALUMIN ... p147323230
i performed this upgrade on my hd3 ext. haven't cut anything yet so i can't say if it was worth it but i'll report back. i paid $120.04 with shipping. the old clamp weighed in at 3lbs 2oz, this new one is 3lbs 8oz.
https://www.nextwavecnc.com/shop/ALUMIN ... p147323230
i performed this upgrade on my hd3 ext. haven't cut anything yet so i can't say if it was worth it but i'll report back. i paid $120.04 with shipping. the old clamp weighed in at 3lbs 2oz, this new one is 3lbs 8oz.
-
- Posts: 105
- Joined: Fri Jan 11, 2019 8:26 am
Re: hd3 upgrade - hd5 aluminum spindle clamp
Have you now cut anything? I'm curious about this for my HD4
Shark HD4 Extended Bed, Water Cooled Spindle. VCarve Pro 10.5
Maker of many chips
Maker of many chips
Re: hd3 upgrade - hd5 aluminum spindle clamp
yes i have been using it. the only issue i was having with the stock clamp, was with 1/2” acrylic. every once in a while i would experience some bit chatter. i just cut two sheets of 1/2” acrylic and experienced no chatter at all. not scientific as there are a lot of variables when dealing with spindle stability and bit chatter, but in my experience it seems to have worked. not sure it was worth $120 though.
Re: hd3 upgrade - hd5 aluminum spindle clamp
...just sayin'....
=====================================================
ThomR.com Creative tools and photographic art
A proud member of the Pacific Northwest CNC Club (now on Facebook)
ThomR.com Creative tools and photographic art
A proud member of the Pacific Northwest CNC Club (now on Facebook)
-
- Posts: 105
- Joined: Fri Jan 11, 2019 8:26 am
Re: hd3 upgrade - hd5 aluminum spindle clamp
I would love to have one of your upgrades!! What is the cost?
Shark HD4 Extended Bed, Water Cooled Spindle. VCarve Pro 10.5
Maker of many chips
Maker of many chips
Re: hd3 upgrade - hd5 aluminum spindle clamp
If the unit is compatible, it's $899 + shipping. It includes the full replacement gantry carriages, all the way to the bearing blocks.
It also includes the necessary gantry plate (top) and gantry drive plate (under the bed) reinforcements, and all hardware. I even
include the drill bits and a printed, fully illustrated 50-page installation and alignment manual.
But, that means it has to be an HD2, or maybe an HD3. Is that what you're running now?...your tag says you have a 4....which I'm pretty
sure will NOT work. Not so much because of the bearing interface...I can figure that out...but, because the rails are completely
unsupported which means that reinforcing the gantry plate won't do a thing to help the head-dive. Do you find those big gantry
rails flex an are part of the problem? If they're not, then the bearing mounts are pretty easy to accomplish, an modify my design to suit.
Clearly I need to figure out how to "fix" that version too . I'll be meeting up with a guy who has a 4 we're looking to improve, the
first week of February. So, maybe in a month or so there will be a model capable of helping your situation. The HDPE drove me nuts too.
Regards,
Rando
It also includes the necessary gantry plate (top) and gantry drive plate (under the bed) reinforcements, and all hardware. I even
include the drill bits and a printed, fully illustrated 50-page installation and alignment manual.
But, that means it has to be an HD2, or maybe an HD3. Is that what you're running now?...your tag says you have a 4....which I'm pretty
sure will NOT work. Not so much because of the bearing interface...I can figure that out...but, because the rails are completely
unsupported which means that reinforcing the gantry plate won't do a thing to help the head-dive. Do you find those big gantry
rails flex an are part of the problem? If they're not, then the bearing mounts are pretty easy to accomplish, an modify my design to suit.
Clearly I need to figure out how to "fix" that version too . I'll be meeting up with a guy who has a 4 we're looking to improve, the
first week of February. So, maybe in a month or so there will be a model capable of helping your situation. The HDPE drove me nuts too.
Regards,
Rando
=====================================================
ThomR.com Creative tools and photographic art
A proud member of the Pacific Northwest CNC Club (now on Facebook)
ThomR.com Creative tools and photographic art
A proud member of the Pacific Northwest CNC Club (now on Facebook)
Re: hd3 upgrade - hd5 aluminum spindle clamp
...all that said, I'm seeing no more takers, so I'm going to move on to the next project(s) very soon.
Yes, people: if you want one of these, you need to act now. After Feb, I won't even take orders
for them anymore. There will be no web site you will find them at, they won't be on Amazon or
eBay or any other place. As of 21 Jan 2021, I have most of the parts and materials for two more.
If you want one, now is the time. You snooze, you lose.
Rando
Yes, people: if you want one of these, you need to act now. After Feb, I won't even take orders
for them anymore. There will be no web site you will find them at, they won't be on Amazon or
eBay or any other place. As of 21 Jan 2021, I have most of the parts and materials for two more.
If you want one, now is the time. You snooze, you lose.
Rando
=====================================================
ThomR.com Creative tools and photographic art
A proud member of the Pacific Northwest CNC Club (now on Facebook)
ThomR.com Creative tools and photographic art
A proud member of the Pacific Northwest CNC Club (now on Facebook)
Re: hd3 upgrade - hd5 aluminum spindle clamp
You say this is for the HD3. I have the HD Pro. How do I know if it is an HD3, 4 etc?
CNC Shark Pro Plus - 12/2014
VCarve Pro, PhotoVCarve, Cut3D
ViaCAD 3D, AutoCAD, Sketchup
BobCAD V28
VCarve Pro, PhotoVCarve, Cut3D
ViaCAD 3D, AutoCAD, Sketchup
BobCAD V28
Re: hd3 upgrade - hd5 aluminum spindle clamp
He's talking to me, cromag, Mr. 17 posts.
signed, Rando, Mr. 651 posts.....
=====================================================
ThomR.com Creative tools and photographic art
A proud member of the Pacific Northwest CNC Club (now on Facebook)
ThomR.com Creative tools and photographic art
A proud member of the Pacific Northwest CNC Club (now on Facebook)