sd card in right pane is not enabled
Moderators: ddw, al wolford, sbk, Bob, Kayvon
sd card in right pane is not enabled
Hi guys just starting to set up my Shark and having problems..... The load G code is enabled but the sd card is not ?????
Re: sd card in right pane is not enabled
Hi Mr Pletcher,
Not sure what you mean by the SD Card is not enabled. There is no SD Card button.
A good summary of the role of the SD card in the Shark Control Box is http://www.cncsharktalk.com/viewtopic.php?f=2&t=950.
If the load G-Code button on the Shark Basic Panel is enabled, that is a good thing - indicates the computer can talk to the Shark Control Box and vice versa. You should be able to jog, etc. Click on the Load G Code button, and load a toolpath file (tap file).
Not sure what you mean by the SD Card is not enabled. There is no SD Card button.
A good summary of the role of the SD card in the Shark Control Box is http://www.cncsharktalk.com/viewtopic.php?f=2&t=950.
If the load G-Code button on the Shark Basic Panel is enabled, that is a good thing - indicates the computer can talk to the Shark Control Box and vice versa. You should be able to jog, etc. Click on the Load G Code button, and load a toolpath file (tap file).
Re: sd card in right pane is not enabled
The run from sd card will not be enabled till you load g-code and the computer runs thru the reading cycle. Pete