Cleaning the chips out of Acrylic after v-carving
Moderators: ddw, al wolford, sbk, Bob, Kayvon
-
- Posts: 488
- Joined: Fri Apr 08, 2011 2:14 pm
Cleaning the chips out of Acrylic after v-carving
Hi gang just a tip.After cutting a carving in a acrylic plastic I noticed some chips sticking to the side of the vcarve.I took a wooden dowel and sanded a point on it.placed it in the groove rubbed the sides back and forth to remove the chips.worked great.And the dowel will not scratch the acrylic.Makes it look like a cleaner cut.Give it a try.Basecircle
- Larry Gardner
- Posts: 172
- Joined: Sat Mar 05, 2011 7:05 pm
Re: Cleaning the chips out of Acrylic after v-carving
Very nice.. how thick is that Acrylic
Larry Gardner
Gardner Custom WoodCrafts'
http://www.gardnercustomwoodcrafts.com
http://www.facebook.com/gardnercustomwoodcrafts
Myrtle Beach, South Carolina
Gardner Custom WoodCrafts'
http://www.gardnercustomwoodcrafts.com
http://www.facebook.com/gardnercustomwoodcrafts
Myrtle Beach, South Carolina
Re: Cleaning the chips out of Acrylic after v-carving
I use satay sticks
Cheers
Wolffie
Cheers
Wolffie
-
- Posts: 229
- Joined: Sun Jan 29, 2012 8:01 pm
- Location: Central Ohio
Re: Cleaning the chips out of Acrylic after v-carving
Looks like a round toothpick. Thanks for the tip!
Del
"It's not what you take when you leave this world behind you, it's what you leave behind you when you go."
"It's not what you take when you leave this world behind you, it's what you leave behind you when you go."