x and y

Anything and everything CNC-Shark-related

Moderators: ddw, al wolford, sbk, Bob, Kayvon

Post Reply
mac
Posts: 7
Joined: Tue Mar 01, 2016 8:32 am

x and y

Post by mac »

I have the hd3 slimline and when I design in vcarve the x and y look right. however, when I put it on the machine it is opposite of the drawing. Can i switch the cables? I see people have did it on other machines. Was just wondering. Mac
Top
sharkcutup
Posts: 409
Joined: Tue Mar 08, 2016 5:23 pm

Re: x and y

Post by sharkcutup »

Check out this topic! Good Luck!!!


http://www.cncsharktalk.com/viewtopic.php?f=7&t=2843
V-Carve Pro Tips, Gadget Tips & Videos
YouTube Channel - Sharkcutup CNC
V-Carve Pro 11.554
Top
VBWoodworker
Posts: 10
Joined: Fri Sep 13, 2013 7:05 pm

Re: x and y

Post by VBWoodworker »

Is the option to enter the password field included on the free version of the Shark Control Panel? CTRL+E is Emergency Stop on my hot key listing.

Eric
Eric
Virginia Beach, VA
Top
Post Reply

Return to “CNC Shark”