ssbxfire wrote: ↑Tue Oct 29, 2019 6:26 pmWith a little looking it didn't take long to get my Shark HD4 up on a Blackbox controller.
A few tuning parameters in grbl and I had the Blackbox controller cutting the same circles I cut with the Shark controller/pendant.
Do I plan on keeping the Blackbox connected, not at this time, it's for another project
Controller Replacement BlackBox
Moderators: ddw, al wolford, sbk, Bob, Kayvon
Re: Controller Replacement BlackBox
Try messaging @ssbxfire directly. His post indicates he has one.
CNC Shark Pro Plus - 12/2014
VCarve Pro, PhotoVCarve, Cut3D
ViaCAD 3D, AutoCAD, Sketchup
BobCAD V28
VCarve Pro, PhotoVCarve, Cut3D
ViaCAD 3D, AutoCAD, Sketchup
BobCAD V28
-
- Posts: 13
- Joined: Sat Feb 02, 2013 2:14 pm
Re: Controller Replacement BlackBox
I have an older Shark HD Pro Plus, purchased in Jan 2013. My controller died just before Christmas. NextWaveAutomation was helpful, but did not solve my problem. Rather than by another NWA controller, I bought into the OpenBuilds hardware and software.
Aspire has a post-controller option for OpenBuilds GRBL (inches). But the OpenBuilds Control software does not contain a Machine Profile for the NWA machines.
Can anyone help me with the Machine Profile settings in the OpenBuilds Control software? Thank you.
Aspire has a post-controller option for OpenBuilds GRBL (inches). But the OpenBuilds Control software does not contain a Machine Profile for the NWA machines.
Can anyone help me with the Machine Profile settings in the OpenBuilds Control software? Thank you.