Operational speed is slow

Anything and everything CNC-Shark-related

Moderators: ddw, al wolford, sbk, Bob, Kayvon

Post Reply
Mr. Toad
Posts: 4
Joined: Sat May 09, 2020 12:49 pm

Operational speed is slow

Post by Mr. Toad »

On a project I am cutting the the machine travels to the correct location at the correct speed but when it starts to cut the travel speed is like it is on slow, just barely moving. I checked the setting in the CAD program and they are: travel speed 100ipm., plunge rate is 30 ipm. I can't figure out what the problem is.

Post Reply