Hey happy shark owners,
I have a question...
Are there any shark owners making a profit on their sharks?
If so what are some examples?
Ed
Shark earning it's keep.
Moderators: ddw, al wolford, sbk, Bob, Kayvon
Re: Shark earning it's keep.
Not saying the machine has completely paid for itself, but I certainly am enjoying making a little money now and then. Seems the fun part is not just watching the router do it's work, but the real enjoyment for me is the design. This Vetric V carve software is absolutely incredible; and I haven't gotten into the 3D stuff yet with the other programs. Have to make a few more clocks to afford that!
Dennis
Dennis
Re: Shark earning it's keep.
Mind paid for its self via signs and odd and ends.
-
- Posts: 75
- Joined: Sun May 08, 2011 4:13 am
- Location: Australia
Re: Shark earning it's keep.
Nice Clock! Whats the size of it? That looks like nice fine engraving. Can I ask what bit you use to do that? Is it a 60degree Vbit? Do you paint the letters black with spray paint then sand/plane the surface?
Regards
Andrew
Regards
Andrew
“It’s not that I’m so smart,
it’s just that I stay with problems longer.“
Albert Einstein
it’s just that I stay with problems longer.“
Albert Einstein
Re: Shark earning it's keep.
I'm sure I could've paid for it by now and more if I was willing to run it more often on a wider variety of things. Even at the pace I'm going though, it'll be paid for within the first year.
Re: Shark earning it's keep.
I have had a good bit of business with my Shark. I make small items that I sell on Ebay and 3 other sites, that with some custom signs keeps my spare time occupied and me out of trouble. I try to keep it simple and I have already paid for my Shark
Re: Shark earning it's keep.
Andrew,
I usually use the Rockler 19/32" 60 degree bit on oak that is at least 3/4" thick. You have to be carefull with that bit when you carve designs or it will go through the wood. I spray or brush the paint then belt sand and stain, then tongue oil over everything. The coins are in a pocket and just pressed in.
I usually use the Rockler 19/32" 60 degree bit on oak that is at least 3/4" thick. You have to be carefull with that bit when you carve designs or it will go through the wood. I spray or brush the paint then belt sand and stain, then tongue oil over everything. The coins are in a pocket and just pressed in.