Page 1 of 1

carving on my turning is mirrored

Posted: Mon Nov 11, 2019 6:31 pm
by jshorba3
I made a candle stand and the letter S is on it. It previews fine but carves backwards. Apparently there is a setting to mirror this but I am not able to open up preference settings for A axis on my computer and the pendant has no setting for this.

Re: carving on my turning is mirrored

Posted: Tue Nov 12, 2019 12:45 pm
by Kayvon
If you go into your design file in VCarve/Asipre, you can simply mirror the S by selecting hit and pushing the vertical mirror button (or 'V' on the keyboard) or horizontal mirror button (or 'H' on the keyboard), as appropriate.

Re: carving on my turning is mirrored

Posted: Wed Nov 13, 2019 10:01 pm
by Buc
Re: mirrored carve image
Postby Buc ยป Tue Jun 19, 2012 12:20 pm

Had to edit the Post processor to fix this.

Re: carving on my turning is mirrored

Posted: Tue Nov 19, 2019 6:55 pm
by jshorba3
Was it difficult to edit the post processor to change this? I don't want to have to jiggle the toilet handle every time I flush if you know what I mean.

Re: carving on my turning is mirrored

Posted: Fri Nov 22, 2019 2:53 pm
by Buc
edit PP. for mirrrored image.JPG
Forgive me for I am old and slow. This was 7 years ago.