open a Jpeg image in VCarve Pro.

[paulwooly]

I would like to carve black & white Line drawing in to timber.

Can any one help me open jpegs in Vcarve Pro or advise me how to acheve this.

Regards Paul Woolveridge

[jeb2cav]

Hi Paul,

The best explanation of this process or work flow is found in the Vectric Tutorial #6 for VCarve Pro 2D machining - http://www.vectric.com/WebSite/Vectric/ ... esign.html.

Some other posts on this forum that are related and may be of interest include:

http://www.cncsharktalk.com/viewtopic.php?f=10&t=315
http://www.cncsharktalk.com/viewtopic.php?f=9&t=361
http://www.cncsharktalk.com/viewtopic.php?f=10&t=1894

If you have a more specific question about this process after you review the tutorial, by all means post it. A lot of good answers to be found from the community.

[wolffie]

I would like to carve black & white Line drawing in to timber.

Can any one help me open jpegs in Vcarve Pro or advise me how to acheve this.

Regards Paul Woolveridge

You create a new file then open bitmap.
If it is a black and white picture, move the slider till it says 2 colour, click on the black and create vectors.
Then create your toolpath and save to your PP.

Cheers
Wolffie