Touch Plate!
Moderators: al wolford, sbk, Bob, Kayvon
Touch Plate!
I see on the rockler sight that NWA has released a "Z" zero touch plate...and for only $89.99!
Re: Touch Plate!
And what would one do with that?
-Eric
-Eric
Thanks,
-Eric
Facebook.com/inspireddesignstx
-Eric
Facebook.com/inspireddesignstx
Re: Touch Plate!
Automaticly sets your Z Axis zero point. No more guessing if you've set it at the right point.
Re: Touch Plate!
I would like to see this in action. I could use that when changing bits.
-Eric
-Eric
Thanks,
-Eric
Facebook.com/inspireddesignstx
-Eric
Facebook.com/inspireddesignstx
Re: Touch Plate!
I was just going to suggest they make one. I've been using a Multicam 3000 at work and it has been delightful to use it's touch plate to set Z=0 as well as bottom of plate. Knew it shouldn't be hard as the Probe proves the controller is capable. One contact on a plate you set below the bit. Typically the second contact you attach to the router collet with a magnet. The routine moves the head down slowly until the bit touches the plate closing contact. The software knows how thick the plate is and subtracts that thickness to fix zero Z position. Plate made of aluminum so touching down or crashing down won't ruin the bit.
The user manual for the Touch Plate is here: http://www.rockler.com/tech/43803CNCTou ... ctions.pdf
The user manual for the Touch Plate is here: http://www.rockler.com/tech/43803CNCTou ... ctions.pdf
Last edited by 4DThinker on Tue Aug 07, 2012 7:56 am, edited 1 time in total.
Re: Touch Plate!
Just bought one.
Gonna be interesting to see how well it works.
Cheers
Wolffie
Gonna be interesting to see how well it works.
Cheers
Wolffie
I am never going to die, I live in Paradise already
Re: Touch Plate!
I ordered one too. Shameful price though. About $5 worth of parts. New version of the contoller software require, and to register it you need the number off your plate. No making your own.
Last edited by 4DThinker on Tue Aug 07, 2012 8:15 am, edited 1 time in total.
Re: Touch Plate!
I'd pick one up, but I am trying to pay some things off right now. It will be on the list after Aspire and a Touch Probe.
-Eric
-Eric
Thanks,
-Eric
Facebook.com/inspireddesignstx
-Eric
Facebook.com/inspireddesignstx
Re: Touch Plate!
I believe it is a bit more than $5 worth of parts. Clever little thing though.
Looking forward to getting mine.
Cheers
Wolffie
I am never going to die, I live in Paradise already
Re: Touch Plate!
Let me know how this works out. I am really considering getting a touch plate.