I was in the middle of a cut, when the part came loose during the cutout.
I clicked the e-stop button on the pc screen, and everything shut down as expected.
However, I can't get power to come back on at the control panel.
Any suggestions?
Part came loose, hit e-stop on pc screen no power now.
Moderators: al wolford, sbk, Bob, Kayvon
Re: Part came loose, hit e-stop on pc screen no power now.
Turn the emergency stop button on the control box and it will pop back out. After you hit the stop on the control screen, hit to return home.
Tony
Tony
Buffalo,NY
"What will matter is not what you bought but what you built; not what you got, but what you gave”
Aspire 11.015, photo vcarve, cnc mako shark extended bed with the new upgraded HD 5 gantry with Led pendent.
"What will matter is not what you bought but what you built; not what you got, but what you gave”
Aspire 11.015, photo vcarve, cnc mako shark extended bed with the new upgraded HD 5 gantry with Led pendent.