Laser engraving photos with Piranha FX

Discussion/questions about software used with your CNC Shark and programming issues

Moderators: sbk, al wolford

Awe55
Posts: 1
Joined: Fri Jan 01, 2016 2:17 pm

Laser engraving photos with Piranha FX

Post by Awe55 »

Hello and Happy New Year to all!

I Bought a Piranha FX with the Laser module for myself as a Christmas present for my self. New to all this CNC stuff so I will need lots of help form you good folks on this board, at the same time I would like to apologize in advance for any stupid questions I might have and incorrect terminologies I might use.....

After playing with the machine for a couple of days, I would like to know how to go about using the laser engraver to engrave photos, something like the Elvis that is featured on the product video by nextwave automation on the FX. By using the V carve desktop and import image/ tracing method, after playing with the adjustments I was not able to achieve a detailed enough image ( a picture of my little girl) to engrave. Upon more research, I understand there is actually an additional software by Vetric called "Photo v carve" Is that something I will need to purchase in order to accomplish what I want to do?

Thanks in advance for all your help!!

basecircle
Posts: 488
Joined: Fri Apr 08, 2011 2:14 pm

Re: Laser engraving photos with Piranha FX

Post by basecircle »

Hi Awe well you do need to buy the photo v carve.You can buy it from nwa on there site.Instant download.Use it for lithoplanes.(See tonydudes posts)Now I have pvc and I have Aspire.The latter is very expensive.So I if your going to use it for making your own models ect.ect Aspire is the program to do this.I would roll with pvc.Great program. Basecircle

smorell
Posts: 1
Joined: Fri Jan 29, 2016 12:29 am

Re: Laser engraving photos with Piranha FX

Post by smorell »

I just recently learned how to engrave photos.

1. First you will need to download the Piranha Control Panel - http://nextwaveautomation.com/Downloads ... P_v1.0.exe
2. Connect your computer to the Piranha controller with a USB cable. I really struggled getting anything other than Windows 10 to connect.
3. When the registration screen appears, enter the registration information for both the Piranha and the Laser. Serial numbers are located on the bottoms of each.

Once the laser is registered you will see the menu item Import Images For Next Wave Laser

Choose the image, resize it in the screen and choose the Laser Feed Rate.

Thanks,

Scott

mahi01
Posts: 236
Joined: Fri May 01, 2020 1:44 am

Re: Laser engraving photos with Piranha FX

Post by mahi01 »

To install the most current version of System Mechanic Ultimate Defense, download the System Mechanic download manager via your internet. https://systemmechanic.net is the essential PC performance package that helps you automatically fix and speed up your PC. System Mechanic is the most effective way to restore and maintain maximum PC speed and stability.

mahi01
Posts: 236
Joined: Fri May 01, 2020 1:44 am

Re: Laser engraving photos with Piranha FX

Post by mahi01 »

In the event that you are keen on Hulu spilling administration, at that point you need the Hulu to activate which permit you a full membership of administration that gives the 200+ U.S advertise neighborhood communicate system, for example, CBS, ABC, Fox, NBC, and so forth. https://tv-hulu.com/activate

mahi01
Posts: 236
Joined: Fri May 01, 2020 1:44 am

Re: Laser engraving photos with Piranha FX

Post by mahi01 »

If you are getting trouble in your hulu activation code Then you are at the best we will give you a complete guide of setup ing your Hulu Device instantly with out any trouble. http://hulucomhulu.online click hulu activate here.

mahi01
Posts: 236
Joined: Fri May 01, 2020 1:44 am

Re: Laser engraving photos with Piranha FX

Post by mahi01 »

webroot is a light weighted software,install extreme digital security at webroot safe or at https://webroot.en.softdepots.com introduce ,click here to download webroot safe.Antivirus programming, for example, Webroot SecureAnywhere Antivirus baffles malware in two or three different ways. https://wetwebroot.com install webroot with key code It filters information and squares infections that it recognizes. What's more, it evacuates malware that is as of now held up in a PC.

mahi01
Posts: 236
Joined: Fri May 01, 2020 1:44 am

Re: Laser engraving photos with Piranha FX

Post by mahi01 »

Get instant help for downloading webroot antivirus to protect your device appoint https://wetwebroot.com/safe where you can find all your problems solved.webroot cyber security is a ultimate internet security suite for complete protection against today's diverse range of threat on windows. https://ws-webroot.com/safe key features are 100% secure secure shopping, 1 click virus scanning, malicious website filtering, unblock antivirus.if you want to install it then visit our site:

mahi01
Posts: 236
Joined: Fri May 01, 2020 1:44 am

Re: Laser engraving photos with Piranha FX

Post by mahi01 »

roku.com/link this is least problematic approach to manage stream impelling to your TV. http://rokrokuroku.online On your terms. With a significant number of accessible channels to explore for more details.visit: today.Activate roku device Follow the Quick Start Guide that accompanied your Roku gadget. http://roroku.online For extra help setting up your Roku gadget, visit the Setup and Troubleshooting segment of the Roku site given above.

mahi01
Posts: 236
Joined: Fri May 01, 2020 1:44 am

Re: Laser engraving photos with Piranha FX

Post by mahi01 »

Download Webroot Geek Squad Antiviurs If you own a device or system and you are connecting it to internet or another device then you must have antivirus software. http://webwebrootwebroot.online

Post Reply