New Member
Moderators: sbk, al wolford
New Member
Hello my name is Stan and I'm 18 miles southeast of Rochester, NY looking for members in the area. I've been doing som CNC work for a few months with an X-Carve and now have the Shark HD4 Extended bed. I'll probably need some advice along the way so thank you all in advance.
Re: New Member
Hi Stan and welcome to the club. I'm from Buffalo,NY anytime you need help just ask. tonydude919atyahoo.com We have a cnc get together at the Buffalo Rockler store the 1st sat of every month at 10 am, come and join us. Also look at the map and see who is close by
https://www.google.com/maps/d/u/0/edit? ... 469236&z=5
Tony
https://www.google.com/maps/d/u/0/edit? ... 469236&z=5
Tony
Buffalo,NY
"What will matter is not what you bought but what you built; not what you got, but what you gave”
Aspire 10.017, photo vcarve, cnc mako shark extended bed with the new upgraded HD 5 gantry with Led pendent.
"What will matter is not what you bought but what you built; not what you got, but what you gave”
Aspire 10.017, photo vcarve, cnc mako shark extended bed with the new upgraded HD 5 gantry with Led pendent.