New Member

Discussion/questions about software used with your CNC Shark and programming issues

Moderators: sbk, al wolford

Post Reply
Posts: 1
Joined: Wed Dec 12, 2018 11:22 am

New Member

Post by Natick64 »

Hello my name is Stan and I'm 18 miles southeast of Rochester, NY looking for members in the area. I've been doing som CNC work for a few months with an X-Carve and now have the Shark HD4 Extended bed. I'll probably need some advice along the way so thank you all in advance.

Posts: 1549
Joined: Tue Aug 17, 2010 9:23 am
Location: Buffalo,NY

Re: New Member

Post by tonydude »

Hi Stan and welcome to the club. I'm from Buffalo,NY anytime you need help just ask. We have a cnc get together at the Buffalo Rockler store the 1st sat of every month at 10 am, come and join us. Also look at the map and see who is close by ... 469236&z=5


"What will matter is not what you bought but what you built; not what you got, but what you gave”

Aspire 10.017, photo vcarve, cnc mako shark extended bed with the new upgraded HD 5 gantry with Led pendent.

Post Reply