New Router mount for Z Axis

Anything and everything CNC-Shark-related

Moderators: ddw, sbk, al wolford

New Router mount for Z Axis

Postby gmagge » Mon Oct 14, 2019 1:09 pm

Greetings all, I found an interesting item for sale on eBay and ordered since the seller told me he makes them for the CNC Shark HD4. I ordered one for $89 and will report back how it works out. I’ve changed a clamp to a Dixiebillet aluminum one with good success so taking the next step. Check it out here: http://www.ebay.com/itm/Designed-to-ord ... 2749.l2649
Attachments
2BA91187-6530-41D9-AFA2-3500DA402B20.jpeg
gmagge
 
Posts: 5
Joined: Fri Nov 11, 2016 1:00 pm

Re: New Router mount for Z Axis

Postby Kayvon » Mon Oct 14, 2019 2:11 pm

Brushed aluminum? This is beautiful! I've also had my eye on a Dixiebillet, but I'm waiting for my current mount to break first.

I'm very interested to hear how it works for you.
User avatar
Kayvon
 
Posts: 408
Joined: Tue Oct 21, 2014 11:46 pm

Re: New Router mount for Z Axis

Postby gmagge » Sat Oct 19, 2019 3:32 pm

Hello everyone, just wanted to let you know that I received the mount and it went on perfectly. I removed the original mount/cradle, which was the hardest part, and put on the replacement. I did have to use new screws since the originals were too long. I did some test runs and no flex from the brush getting pushed down or when cutting into hardwood. Still used my Dixiebillet clamp between the two router clamps and it gave it a bit more strength.

If I have anything else to report, I'll post it here.
gmagge
 
Posts: 5
Joined: Fri Nov 11, 2016 1:00 pm

Re: New Router mount for Z Axis

Postby bill z » Fri Oct 25, 2019 6:38 am

Gmagge,

Would you post a picture or two of your new mount set up? I would be very interested.
User avatar
bill z
 
Posts: 330
Joined: Fri Sep 25, 2015 9:09 am
Location: Spring, Texas USA

Re: New Router mount for Z Axis

Postby gmagge » Sun Nov 03, 2019 2:34 pm

I will post one this week. Away from home at the moment.
gmagge
 
Posts: 5
Joined: Fri Nov 11, 2016 1:00 pm

Re: New Router mount for Z Axis

Postby gmagge » Mon Nov 04, 2019 9:43 am

FBA0375E-E206-4372-8055-5C6FC636AA0F.jpeg
DA72D9BF-AB0C-42CF-AD40-986BD7F7F85C.jpeg
Well, here are some pics of new mount. I slipped my Dixiebillet clamp in the middle of the new mount for extra strength (didn’t need it, but I figured it couldn’t hurt). Has allowed me to use higher speed when making cuts and is very rigid.
Attachments
5158AF3F-9B12-495F-81C0-F2B90B81A823.jpeg
gmagge
 
Posts: 5
Joined: Fri Nov 11, 2016 1:00 pm

Re: New Router mount for Z Axis

Postby Kayvon » Tue Nov 05, 2019 3:08 pm

That looks great!
User avatar
Kayvon
 
Posts: 408
Joined: Tue Oct 21, 2014 11:46 pm

Re: New Router mount for Z Axis

Postby cbhelms » Tue Nov 05, 2019 5:21 pm

Thanks for the pictures, just ordered my new router mount today. I too will slip my Dixiebillet clamp into the new mount. I just upgraded my CNC Shark HD Plus that cut 25 X 25 X 7 to the HD 4 Extended, I'm just getting it all put together since I received it. Did 2 test cuts showing that I need to put shims behind the new router mount.

Thanks,
Colin Helms
cbhelms
 
Posts: 19
Joined: Mon Dec 26, 2011 8:35 pm
Location: Charlotte, NC

Re: New Router mount for Z Axis

Postby gmagge » Fri Nov 08, 2019 1:58 pm

Hope you get the same good results I am. Good luck!
gmagge
 
Posts: 5
Joined: Fri Nov 11, 2016 1:00 pm

Re: New Router mount for Z Axis

Postby bill z » Sun Nov 10, 2019 9:20 am

gmagge,

Please, for clarification, does your Dixiebillet clamp actually clamp or is it bolted to the new Z axis router mount?

Also, on my shark, I had to shim my Dixiebillet clamp just a little to get the router perpendicular to the table top because there was not adjustment in the Shark. Does the new Z axis router mount allow for any slight adjustments?
User avatar
bill z
 
Posts: 330
Joined: Fri Sep 25, 2015 9:09 am
Location: Spring, Texas USA


Return to CNC Shark

Who is online

Users browsing this forum: No registered users and 3 guests