laser attachment

Anything and everything CNC-Shark-related

Moderators: ddw, sbk, al wolford

laser attachment

Postby simja65 » Sun Dec 08, 2019 5:55 pm

I recently bought the laser and all needed accessories to convert my controller. I tried running a test path and nothing happened except the Z axis went up and down . The controller just went back to the run screen after the router went up in down in the Z axis and the laser did not come on. I am running Vcarve Pro 10.0 and CNC Shark CP v1.6
Do I need to get another CP program, download something else, or what. Also I used CNCShark Laser (inch)(*.tap) as the post processor.

Any help would be greatly appreciated.
simja65
 
Posts: 30
Joined: Fri Jan 16, 2015 3:33 am

Re: laser attachment

Postby tonydude » Sun Dec 08, 2019 11:21 pm

Here is the manual for the laser.

Tony
Attachments
laser manual.pdf
(1.18 MiB) Downloaded 16 times
Buffalo,NY

"What will matter is not what you bought but what you built; not what you got, but what you gave”

Aspire 10.017, photo vcarve, cnc mako shark extended bed with the new upgraded HD 5 gantry with Led pendent.
tonydude
 
Posts: 1536
Joined: Tue Aug 17, 2010 9:23 am
Location: Buffalo,NY

Re: laser attachment

Postby simja65 » Mon Dec 09, 2019 5:29 pm

I think I followed all the steps still cannot get the file to run.

laser engrave test 1.tap
(9.22 KiB) Downloaded 13 times


tool setup.PNG

material setup.PNG
simja65
 
Posts: 30
Joined: Fri Jan 16, 2015 3:33 am

Re: laser attachment

Postby tonydude » Tue Dec 10, 2019 8:44 am

Look here for the download section for laser https://www.nextwaveautomation.com/downloads-links
Also contact nextwave
(419)491-4520

Tony
Buffalo,NY

"What will matter is not what you bought but what you built; not what you got, but what you gave”

Aspire 10.017, photo vcarve, cnc mako shark extended bed with the new upgraded HD 5 gantry with Led pendent.
tonydude
 
Posts: 1536
Joined: Tue Aug 17, 2010 9:23 am
Location: Buffalo,NY


Return to CNC Shark

Who is online

Users browsing this forum: No registered users and 2 guests