Hello;
Have you checked you router bracket, making sure it is tight? The tool could be pulling the router down into your material.
Zehrah
Good Luck
Search found 10 matches
- Sat Apr 23, 2016 4:43 pm
- Forum: Software. Programming
- Topic: My tool path suddenly starts going deeper
- Replies: 3
- Views: 3811
- Sat Apr 23, 2016 3:58 pm
- Forum: Software. Programming
- Topic: controller issues
- Replies: 9
- Views: 8791
controller issues
Hello all; Lately (past 3 months or so), I have been having controller problems. It started with my computer having an error code stating that the USB connection cannot be recognized, and my Shark control panel says to check the power supply and USB cable. I have changed both the power supply and US...
- Fri Aug 08, 2014 2:58 pm
- Forum: CNC Shark Pro Plus HD
- Topic: making words curve..lol
- Replies: 2
- Views: 2335
making words curve..lol
Hello all; I have a basic question...I have been trying to figure it out for a few days now...and my head hurts. I have done it before, but I am old and forget things easily...lol. How can I carve words on a radius? I know it is really simple and I will say to myself "oh yeah...now I remember" but f...
- Sun May 11, 2014 4:40 pm
- Forum: CNC Shark
- Topic: Tell us where you're from map
- Replies: 617
- Views: 544418
Re: Tell us where you're from map
Hello All, I'm from Hemet California.
Zehrah
Thanks Tony
Zehrah
Thanks Tony
- Fri May 02, 2014 10:57 pm
- Forum: CNC Shark
- Topic: rotary attachment
- Replies: 39
- Views: 25357
Re: rotary attachment
Hello All:
Just wondering what the status of the 4th axis is. Haven't heard a thing since the October of 2013.
Zehrah
Just wondering what the status of the 4th axis is. Haven't heard a thing since the October of 2013.
Zehrah
- Sun Apr 27, 2014 2:24 pm
- Forum: CNC Shark Pro Plus HD
- Topic: activating the M3 command in a file
- Replies: 6
- Views: 3883
Re: activating the M3 command in a file
FYI, I contacted Vectric Support and they told me that as far as they knew the CNC Shark does not support auto router start. I did come to the conclusion that I just had to unplug my router from the controller and plug it into another outlet and manually turn on the router. Case solved. Thanks for a...
- Fri Apr 25, 2014 7:33 pm
- Forum: CNC Shark Pro Plus HD
- Topic: activating the M3 command in a file
- Replies: 6
- Views: 3883
Re: activating the M3 command in a file
Yes Sir, it is connected to controller and the router button is on, the controller is on as well.
thanks
thanks
- Fri Apr 25, 2014 6:26 pm
- Forum: CNC Shark Pro Plus HD
- Topic: activating the M3 command in a file
- Replies: 6
- Views: 3883
activating the M3 command in a file
Hello all: I purchased a project from Vectric, I received it and created the tool path in Cut3D. After saving the file I downloaded it to my control panel. I set all axis to 0.00 and ran the program. It started to do all the initial moves however, it did not read the M3 command to turn on my router....
- Mon Apr 21, 2014 3:23 pm
- Forum: CNC Shark Pro Plus HD
- Topic: CNC Shark HD, which is the best CAD software?
- Replies: 3
- Views: 2685
CNC Shark HD, which is the best CAD software?
Hello all. I recently purchased a CNC Shark HD, it came with VCarve pro 7.0 and Cut3D. I apologize in advance, I am a newbie at CNC carving. I am interested is utilizing some greyscale pics (from internet and my own drawings) to create some carvings. What is the best CAD software to use? Will the Cu...
- Thu Mar 06, 2014 9:01 pm
- Forum: Show off your CNC Shark projects
- Topic: Plaque for my sister's addtion
- Replies: 8
- Views: 4251
Re: Plaque for my sister's addtion
Hey Tom, Very nice work! Can you give me a few details about it? I have yet to purchase my Shark, waiting on my house to sell, lol. Did you have to do any sanding after routing this project? If so, not much I would assume. What kind of wood is it, and what bit did you use? Again very nice work Zehra...