I tired to use my cnc shark yesterday for the first time in a few months and ran into the following issue, After I loaded a file and it told me to turn on the router all I got was one grunt from the machine and the load file button relit. I tried several different files that I have used before with the same result,
I also tried to use three different sd cards, but the result was the same. Any ideas?
Thanks!
Gcode loads but wont run
Moderators: al wolford, sbk, Bob, Kayvon
Re: Gcode loads but wont run
Is this the same issue you described earlier?
http://www.cncsharktalk.com/viewtopic.php?f=10&t=5159
We tried to help, but you never responded. If it's a different issue, it would be nice to know how you resolved the earlier one, especially if they turn out to be related.
http://www.cncsharktalk.com/viewtopic.php?f=10&t=5159
We tried to help, but you never responded. If it's a different issue, it would be nice to know how you resolved the earlier one, especially if they turn out to be related.
-
- Posts: 6
- Joined: Tue Jun 14, 2011 8:36 am
Re: Gcode loads but wont run
Problem solved. I used a smaller capacity sd card and it resolved the issue. Thanks for you assistance.
Re: Gcode loads but wont run
I'm glad you figured it out. Thanks for posting the solution -- it will be helpful for when others have the same issue.
What size SD card did you end up using?
What size SD card did you end up using?