Forum rules
Do not post any files that violate copyright or licensing guidelines. Any post violating this rule will be deleted and the member may be banned from future use of cncsharktalk.
Do you live in Australia or New Zealand? Your pictures appear to be upside down. I figure they would work down there.
This is certainly an interesting pattern.
Neither I live in the Southeast of the USA. I posted this thread from my cell phone, not exactly sure why the photo is upside down here. It is in the correct orientation on my cell.
Yeah the pattern was drawn from what I had seen while I was out and about one day. Thought I'd give it a go and see how it would look --- turned out very nice so far. I plan on putting a thin slab
of red oak in between the two base slabs and putting a darker stain on the middle (clock) section with the rest I will probably just put a natural finish coat on them.
Have a GREAT DAY!!!
Be SAFE around those AWESOME machines!!!
Sharkcutup
V-Carve Pro Tips, Gadget Tips & Videos
YouTube Channel - Sharkcutup CNC
V-Carve Pro 11.554
Join us in the wooden clock thread... you'll find some increased challenge. Kayvon
Challenge --- I Agree!!!
But I am not so sure I want to play around with " Time "! Seems to me that " Time " has been moving along just fine without any of my help and/or interference!!!
Kayvon, Thank you for the suggestion though! I have been monitoring that particular Thread "CNC and Clock Building" from time to time. It is fascinating and AWE inspiring to see wood returned to life once again!
Good Luck with your Wood Clock Building!!!
Have a GREAT DAY!!!
Be SAFE around those AWESOME machines!!!
Sharkcutup
V-Carve Pro Tips, Gadget Tips & Videos
YouTube Channel - Sharkcutup CNC
V-Carve Pro 11.554