Overall dimensions
Moderators: ddw, al wolford, sbk, Bob, Kayvon
Overall dimensions
I have recently ordered the new Shark Pro plus Maco HD machine. I want to build a stand with a dust enclosure. Can anyone give me the outside dimensions of the machine. L x W x H
Re: Overall dimensions
The size is 37 1/2 by 37/12 by 28 height if you do max setting.
IF you are doing a case make it min 1 inch from the motors if doing a plexi glass case.
Also have metal on the case and ground it so static charges will dissipate or you can get erratic operation if static goes into the motors.
IF you are doing a case make it min 1 inch from the motors if doing a plexi glass case.
Also have metal on the case and ground it so static charges will dissipate or you can get erratic operation if static goes into the motors.
Re: Overall dimensions
Thanks Tim, and thanks for the staid ground tip, I would not have thought of that.
Re: Overall dimensions
I would provide at least 2" clearance along the Y axis on one side to provide room for the cables to the gantry.