Here are the inside of my litho boxes I make, with connections for a switch to turn on and off. You can also change to a new litho too.
Tony
Inside of my litho box
Moderators: al wolford, sbk, Bob, Kayvon
- Larry Gardner
- Posts: 172
- Joined: Sat Mar 05, 2011 7:05 pm
Re: Inside of my litho box
Thanks Tony looks great
Larry Gardner
Gardner Custom WoodCrafts'
http://www.gardnercustomwoodcrafts.com
http://www.facebook.com/gardnercustomwoodcrafts
Myrtle Beach, South Carolina
Gardner Custom WoodCrafts'
http://www.gardnercustomwoodcrafts.com
http://www.facebook.com/gardnercustomwoodcrafts
Myrtle Beach, South Carolina
-
- Posts: 584
- Joined: Sun Jan 15, 2012 6:46 pm
- Location: North Little Rock, Arkansas
Re: Inside of my litho box
I like that, been glueing mine in with silacon, never thought about changing them out!
Being retired is hard work. Spending way too much time in the shop these days. (And loving it).
Shark Pro Plus HD, Vcarve Pro, Photo V Carve, Cut 3D, scan probe.
Shark Pro Plus HD, Vcarve Pro, Photo V Carve, Cut 3D, scan probe.
Re: Inside of my litho box
Just curious Tony,
Have you attempted putting the LED's on the back panel so that it could all be assembled as one unit with the switch and power jack? My guess is that it might create hot spots where you could see the LED through the Litho.
Excellent design.
Roger
Have you attempted putting the LED's on the back panel so that it could all be assembled as one unit with the switch and power jack? My guess is that it might create hot spots where you could see the LED through the Litho.
Excellent design.
Roger
CNC Shark HD ~ Control Panel 2.0 ~ Windows 7 & XP
Located in West Tennessee near the Tennessee River
http://www.eaglecarver4.com
Located in West Tennessee near the Tennessee River
http://www.eaglecarver4.com
Re: Inside of my litho box
Roger,
I have no problems with the leds showing thru the lithos. No hot spots. i place the leds about 1-1 1/2" from the lithos.
I've been thinking about puting the leds on the back panel, might try it next time.
Tony
I have no problems with the leds showing thru the lithos. No hot spots. i place the leds about 1-1 1/2" from the lithos.
I've been thinking about puting the leds on the back panel, might try it next time.
Tony
Buffalo,NY
"What will matter is not what you bought but what you built; not what you got, but what you gave”
Aspire 11.015, photo vcarve, cnc mako shark extended bed with the new upgraded HD 5 gantry with Led pendent.
"What will matter is not what you bought but what you built; not what you got, but what you gave”
Aspire 11.015, photo vcarve, cnc mako shark extended bed with the new upgraded HD 5 gantry with Led pendent.