Page 1 of 1
Mahogany cribbage board
Posted: Fri Dec 30, 2016 5:48 pm
by Kayvon
A good friend of mine approached me about making a cribbage board for his parents. It made for a fun project on the CNC machine--definitely the type of thing that shows off the machine's strengths while being very approachable for new hobbyists.
- Engraving the numbering
- Completed board
As usual, I've posted additional pics and a brief write-up here:
http://perryprojects.blogspot.com/2016/ ... board.html
Re: Mahogany cribbage board
Posted: Tue Jan 03, 2017 11:00 am
by TAW
looks good
Re: Mahogany cribbage board
Posted: Mon Jan 09, 2017 2:44 am
by IDBD
Kayvon,
What size bit are you using on this?
Kayvon wrote:A good friend of mine approached me about making a cribbage board for his parents. It made for a fun project on the CNC machine--definitely the type of thing that shows off the machine's strengths while being very approachable for new hobbyists.
05 - Numbers.jpg
14 - Complete.jpg
As usual, I've posted additional pics and a brief write-up here:
http://perryprojects.blogspot.com/2016/ ... board.html
Re: Mahogany cribbage board
Posted: Mon Jan 09, 2017 11:06 am
by Kayvon
Download the design and you can see all the bits being used:
http://cncsharktalk.com/viewtopic.php?f=12&t=5265