12" x 14" x 1/2" cut from Avonite which is a solid surface material. Had lots of trouble with the dish hands. Wound up using a 1/16" Ball nose for finish cut.
Thanks for all the helpful messages when I had problems with the hand.
I wound up using a 1/16" Round Nose which I got to work.
I'm still learning about pricing.
What might I charge for something like this?
Thanks
Serenity Prayer
Moderators: al wolford, sbk, Bob, Kayvon
Re: Serenity Prayer
That really came out very nice Mark. Great job. How long did it take to carve and how long was the manual labor?
-
robthowells
- Posts: 35
- Joined: Sun Jan 15, 2012 2:45 pm
Re: Serenity Prayer
Super nice. always tried to live by those words!
Re: Serenity Prayer
Mark,
Very nice carving. That stuff is nice to work with just like corian.
Tony
Very nice carving. That stuff is nice to work with just like corian.
Tony
Buffalo,NY
"What will matter is not what you bought but what you built; not what you got, but what you gave”
Aspire 11.015, photo vcarve, cnc mako shark extended bed with the new upgraded HD 5 gantry with Led pendent.
"What will matter is not what you bought but what you built; not what you got, but what you gave”
Aspire 11.015, photo vcarve, cnc mako shark extended bed with the new upgraded HD 5 gantry with Led pendent.